KB Electronics - KBMM-225

IMPORTANT NOTE:

This item requires a properly sized horsepower resister in order to operate.

(Horsepower resistors are sold separately.)

Click to view HP sizing chart

TYPICAL APPLICATIONS

Conveyors • Packaging Machines • Feeders • Welding Positioners • Pumps Machine Tools • Exercise Equipment • Screening and Printing Equipment

The datasheet also contains HP sizing and basic wiring information.
Needs Adobe Acrobat Reader get it by clicking-here.

* Large metal mounting surface can substitute for heatsink.

Note: Model KBIC-240DS, 90 VDC Output Only.
.

HORSEPOWER RESISTORS

This Motor controller requires at least one horsepower resistor properly sized to your motor.

ACCESSORIES

Click for Chart	Line / Armature Fuse (Needs Line/Armature Fuse Block or Fuse Kit)
(P/N 9107)	KBRF-100 CSA Approved AC Line Filter
(P/N 9111)	5K Ohm Potentiometer Kits Conductive Plastic (No Switch)
(P/N 9114)	5K Ohm Potentiometer Kits Conductive Plastic (w On-Off Switch)
(P/N 9443)	SI-5 Signal Isolator (KBIC)
(P/N 9463)	Run-Brake Mod-Stand Alone (DB Res Sold Separately)
(P/N 9484)	KBRF-300 CE Approved AC Line Filter (Class B)
(P/N 9509)	KBRF-250 CE Approved AC Line Filter (Class A)
(P/N 9511)	KBRF-350 CE Approved AC Line Filter (Class B)
(P/N 9815)	Dial Plate & Knob Kit - Small
(P/N 9829)	Auxiliary Heatsink "9 inch"
(P/N 9831)	5K Ohm Pot Wire Wound (No Switch)
(P/N 9832)	Dial Plate & Knob Kit - Large
(P/N 9844)	Reversing Switch (DB Resistor Sold Separately)
(P/N 9849)	Combination Fuse Kit (KBWD) (Fuses Not Included)
(P/N 9861)	Auxiliary Heatsink "7 inch"
(P/N 9863)	Barrier Terminal Kit (KBIC)
(P/N 9864)	DB Resistor 10 ohm 30W
(P/N 9865)	DB Resistor 10 ohm 70W
(P/N 9884)	Barrier Terminal Board (KBIC)
(P/N 9945)	KBRF-200A AC Line Filter (Class A)
(P/N 9993)	Armature Choke / Input AC Line Choke
(P/N 9995)	Din Rail Mounting Kit

SPEED CONTROL PRODUCTS

(P/N 8805)	KBPS-240D Reference Voltage Power Supply
(P/N 9106)	KBAP-240D Current Sensing Relay/Overload Protector
(P/N 9431)	KBSI-240D Signal Isolator
(P/N 9469)	KBET-240D Frequency to Analog Tach and Follower
(P/N 9108)	KBEP-240D Electronic Pot